Bush's Post

How can I know the building Sway or Non Sway !!!!! For ACI ( 318-19) : made 2 conditions 1) The increase in column end moments due to second order effects does not exceed 5 percent of the first-order end moments 2) The stability index for a story Q= Σ Pu* ∆ / Vu* L where ∑Pu and Vu are the total factored vertical load and horizontal story shear.... ∆ is the first-order relative lateral deflection between the top and the bottom of that story due to Vu...... Q (not exceed 0.05) We are practically performing a verification on number 2 in ETABS (IF Q more than .05 We classified this building Non Sway) ⬛ ETABS 🔺 PU From Result ...Story forces by Load combo ( 1.2 DL + .5 L.L ) not 1.6 LL because we have EQ 🔺 VU and ∆ ( It is intended to use dynamic analysis but because force from static analysis more than dynamic , some places prefer to verify using static analysis 🔺 L height of floor

• 289 2
• 35.8K Followers
• 425 Posts
• 382 Average Likes
• 1.07% Eng. Rate

This post was published on 27th September, 2023 by Bush on his Instagram handle "@etabs_2020 (Etabs)". Bush has total 35.8K followers on Instagram and has a total of 425 post.This post has received 289 Likes which are lower than the average likes that Bush gets. Bush receives an average engagement rate of 1.07% per post on Instagram. This post has received 2 comments which are lower than the average comments that Bush gets. Overall the engagement rate for this post was lower than the average for the profile.