Neetu's Post

DIY boring door → classy statement 🚪✨ 🚪 Started with a simple plan for the pattern I wanted. Cut a full veneer sheet accordingly and sanded it first while it was flat to save effort later. After removing all the door hardware, I sanded the door surface so the adhesive could grip well. 🌼 Each veneer piece was pasted with strong furniture adhesive following the pattern I had marked. I made sure the gaps were consistent and played with horizontal and vertical grains to create a more interesting look. 🌺 To finish it off, I added beading around the frame and applied three coats of wood polish — sanding lightly between coats. That’s the trick to getting a smooth finish instead of a rough surface. 👉And this is the final look! 😳 But the entrance still looked incomplete… so I added that arch… so in the next reel I’m showing how I turned this doorway into an arch (my absolute favourite design element). Stay tuned ✨ Diy door makeover, diy home entrance, home entryway decor, entry door, diy ideas, diy Indian homes #diyhomeprojects #homeentrance #entrywaydecor #entrywaydesign #diydecoration

• #diydecoration
• #entrywaydesign
• #diyhomeprojects
• #homeentrance
• #entrywaydecor

• 2.1K 185
• 597.0K Followers
• 723 Posts
• 11.8K Average Likes
• 2.01% Eng. Rate

This post was published on 12th March, 2026 by Neetu on her Instagram handle "@creative_homes.and.gardens (Neetu Jakhar)". Neetu has total 597.0K followers on Instagram and has a total of 723 post.This post has received 2.1K Likes which are lower than the average likes that Neetu gets. Neetu receives an average engagement rate of 2.01% per post on Instagram. This post has received 185 comments which are lower than the average comments that Neetu gets. Overall the engagement rate for this post was lower than the average for the profile. #diydecoration #entrywaydesign #diyhomeprojects #homeentrance #entrywaydecor has been used frequently in this Post.